Combined Microwave / Gas Drier
Universal Hybrid Oven Microwave/Air Drier
Microwave Power: 2,2 kW stepless adjustable
Recirculating Hot Air System: 5 kW/max. 200 ºC with temperature measurement and controller
Microwave Hybrid Chamber Dryer
for example drying of ceramics, casting cores, grinding wheels, high voltage isolators etc.
Width ca. 2500 mm
Depth ca. 2900 mm
Height ca. 3100 mm
Inside Chamber dimensions:
Width ca. 2200 mm
Depth ca. 1800 mm
Height ca. 1900 mm
Microwave power: 56 kW
Hot air: 45 kW/max. 250 ºC
The sintering oven FMO 8/3 kW uses a combination of a 8 kW resistive heating and a 3 kW microwave heating. The microwaves increase the heating rate during the sintering time and improve the mechanical characteristics of the products. The oven is very suitable for sintering ceramics with a small volume up to 1350 degrees.
The firing oven LH 60 MW is equipped with a conventional resistive heating of 8 kW and a microwave heating of 1.1 kW. It was developed for the fast drying and firing of ceramics. The microwaves decrease the drying time down to less than 95%.
The laboratory oven FMG 1100 R uses 1,1 kW microwave power and was developed for the heat treatment of plastic probes in a hot nitrogen stream. The nitrogen is heated up by an integrated fan with 500 W heating power.